Rice-lake 880 Performance Series Indicator/Controller Techni Bedienungsanleitung Seite 95
- Seite / 120
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Ethernet and USB 89
• When set to a higher value, the connection will be terminated after inactivity for the specified period of
time, in seconds.
The timeout feature is useful when several indicators want to print to the same printer.
9.1.4 Connecting to a Remote Host - Stream weight data to an Ethernet Remote Display
1. Connect the 880 and Remote Display either directly
to each other (each with a
Ethernet Remote Display
IP: 192.168.0.10
TCP Port: 10001
880 Client
IP: 192.168.0.110
Remote IP: 192.168.0.10
Remote Port: 10001
Network
Switch
Static IP on the same
subnet), or through an Infrastructure Network.
2. Configure the Client Remote Server IP and port to
the
IP address and TCP port of the remote display.
3. Configure the trigger setting for the Client to either
S
tream Industrial (STRIND), or Stream Legal-for-
Trade (STRLFT).
4. To prevent data overrun on the receiving device (the
880 will st
ream data at up to 50 frames per second),
it is recommended the Client’s End-of-Line Delay be
set to 1 (10 frames per second) or 2 (5 frames per
second), or higher. This is also a good way to help
reduce network traffic if speed is not a concern. If data at the remote display appears to lag, or get behind
the data on the indicator, the End-of-Line Delay may need to be increased even more.
5. Shortly after returning to weigh mode, the 88
0 will start to stream data to the Ethernet Client port. The 880
will then attempt to make the connection. The data will be sent to the Remote Host once connected. This
may take several seconds.
Note
There may be several seconds worth of buffered data sent at the moment of connection.
9.1.5 Connecting to a Remote Host, Stream/Demand Data to Remote Ethernet-to-RS-232 Device Server
1. Connect the 880 and device
server either directly to
Ethernet to RS-232
Device Server
IP: 192.168.0.30
TCP Port: 10001
880 Client
IP: 192.168.0.110
Remote IP: 192.168.0.30
Remote Port: 10001
Network
Switch
Serial Device
such as a Printer,
Remote Display,
or Serial Scale in
an Indicator
RS-232
Figure 9-4. Stream or Demand Data to a Remote Ethernet
to RS232 Device Server
each other
(each with a static IP on the same
subnet), or through an
infrastructure network.
2. Configure the Client Remote
Server I
P and port to the IP
address and TCP port of the
device server.
3. Configure the trigger setting for
th
e client to either command
mode (COMAND), stream
industrial (STRIND), or stream
Legal-for-Trade (STRLFT),
depending on the application.
4. Connect the serial output of the device server to the se
rial device set to send or receive data through the
Ethernet connection.
Note
In this configuration, the 880 has to initiate the connection
- 880 Performance Series 1
- Technical/Service 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 7
- General Safety 8
- 1.2 Operating Modes 9
- 1.3 Front Panel Display 9
- Center of Zero LED 10
- Standstill LED 10
- 1.4 Indicator Operations 11
- 1.4.7 Print Ticket 12
- 1.4.8 Front Panel Setup 12
- 1.4.10 Setpoints 13
- Turn Setpoint On or Off 13
- 1.4.11 Set Time and Date 14
- 1.4.12 Display Accumulator 14
- 1.4.13 Clear the Accumulator 14
- 1.4.14 Display Tare 15
- 2.0 Installation 16
- 2.2 Panel Mount Installation 17
- Important 18
- J1 J2 J3 J4 J5 J6 19
- 2.4 Display Board Replacement 22
- 2.5 Cable Connections 22
- 2.6 USB Host 24
- 2.7 Ethernet Communications 24
- 2.8 CPU Board 25
- 2.10 Board Replacement 26
- 2.11 Digital I/O 28
- 2.12 Legal for Trade Sealing 28
- 2.13 Option Cards 29
- 2.14 Battery Replacement 29
- 2.15 Replacement Parts 30
- 3.1.3 User Setup Menu 33
- 0 0 0 0 0 0 34
- 3.2.1 Audit Menu 35
- 3.2.2 Setup Menu 36
- 37
- SCALE Menu 38
- 3.2.4 FORMAT Menu 40
- FORMAT Menu 41
- 3.2.5 Calibration Menu 42
- FEATUR Menu 44
- COM Menu 50
- ETHERNET Menu 52
- 3.2.11 USB Host 53
- 3.2.12 Print Format Menu 54
- Configuration 51 57
- SETPTS Menu 58
- 4.0 Calibration 63
- 4.1 Front Panel Calibration 64
- 4.1.2 Rezero 65
- 4.5 Gravity Compensation 66
- 4.6 EDP Command Calibration 67
- 4.7 Revolution 67
- Calibration 67
- 5.0 Using Revolution 68
- 5.2 Configuration 69
- 5.4 Revolution Help 70
- 6.0 EDP Commands 71
- 6.1.2 Reporting Commands 72
- Scales Menu 73
- Format Menu 73
- Calibration Menu 74
- Ports COM Menu 74
- Ports – Field Bus Menu 75
- Ports – Ethernet Menu 75
- Ports – USBCOM Menu 76
- Stream Tokens Menu 76
- Feature Menu 76
- Regulatory Menu 77
- Time and Date 77
- Passwords Menu 77
- Keypad Lock Menu 77
- Setpoints Menu 78
- Print Format Menu 80
- Analog Out Menu 80
- 6.1.5 Normal Mode Commands 81
- Digital I/O Control Menu 82
- 6.1.6 ERROR Commands Output 82
- 7.0 Print Formatting 83
- 7.2 Default Print Formats 84
- 7.3 Customizing Print Formats 85
- 7.3.3 Using Revolution 86
- 8.0 Setpoints 87
- 8.2 Batch Operations 89
- 8.3 Batching Examples 91
- Example 2 92
- 9.0 Ethernet and USB 93
- Ethernet and USB 89 95
- Using Revolution 96
- with Ethernet 96
- 9.2 USB Host 97
- 9.2.2 USB Memory storage 98
- Saving Configuration 98
- Loading Configuration 98
- 10.0 Appendix 100
- 10.3 ERROR Commands Output 101
- 10.4 Status Messages 102
- 10.6 Data Formats 103
- <STX> 104
- ONTROL-B>AXG#1<CR> 105
- 10.8.1 Toledo 8142 Indicator 108
- 10.8.2 Cardinal 738 Indicator 109
- 10.9 ASCII Character Chart 111
- 10.10 Digital Filtering 113
- (Section 4.0) 114
- 10.12 Specifications 115
- 880 Limited Warranty 116
- For More Information 117
- PN 158387 Rev C 120
Verwandte Produkte und Handbücher für Waage Rice-lake 880 Performance Series Indicator/Controller Techni
(4 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.024 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern