Rice-lake 880 Performance Series Indicator/Controller Techni Bedienungsanleitung Seite 80
- Seite / 120
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
74 880 Technical/Service Manual
Print Format Menu
The Menu items (except for HDRFMT) are listed by the format and the sub-parameters.
Table 6-17. Print Format EDP Commands
Command Menu Description Choices / Range
ACC.FMT ACCFMT | FMT Accumulator enabled and displayed,
or
setpoint print operation with
PSHACCM=ON
Alphanumeric, Max Length: 1000
ACC.PORT ACCFMT | PORT Accumulator print port COM, USBCOM, ETH-S, ETH-C, U
SBMEM, OFF
GFMT.FMT GFMT | FMT Normal mode, no tar
e in system Alphanumeric, Max Length: 1000
GFMT.PORT GFMT | PORT Normal mode, no tare in system, pr
int port COM, USBCOM, ETH-S, ETH-C, USBMEM, OFF
HDRFMT1 HDRFMT Must be inserted into other print format Alphanumeric, Max Length: 300
NFMT.FMT NFMT | FMT Normal mode, tare in system Alphanumeric, Max Length: 1000
NFMT.PORT NFMT | PORT Normal mode, tare in system,
print port COM, USBCOM, ETH-S, ETH-C, USBMEM, OFF
SPFMT.FMT SPFMT | FMT Setpoint print operation with PSHPRT=ON Alphanumeric, Max Length: 1000
SPFMT.PORT SPFMT | PORT Setpoint print port COM, USBCOM, ETH-S, ETH-C, U
SBMEM, OFF
Note
Note
See Section 7.2 on page 78 for detailed information.
Digital I/O Configuration Menu
Table 6-18. Digital I/O Configuration EDP Commands
Command Menu Choices / Range
DIO.b#s BIT x OFF, PRINT, ZERO, TARE, UNITS, CLEAR, DS
PACC, DSPTAR, NT/GRS, CLRCN,
BATRUN, BATSTR, BATPAS, BATRST, BATSTP, OUTPUT
Digital inputs and outputs are specified by bit number (b = 1, 2, 3 or 4) and slot number (s = 0 or 1).
Analog Out Menu
Table 6-19. ALGOUT EDP Commands
Command Menu Description Choices / Range
ALG.MODE#1 MODE Specifies the weight data, gross or net, tracked by the
analog ou
tput
GROSS, NET
ALG.OUTPUT#1 OUTPUT Specifies the output type 0-10V, 0-20MA, 4-20MA
ALG.ERRACT#1 ERRACT Error action FULLSC, HOLD, ZEROSC
ALG.MIN#1 MIN Minimum value tracked Range: 0 - 999999
ALG.MINNEG#1 MINNEG Specify ON if the minimum weight is a negative value OFF, ON
ALG.MAX#1 MAX Maximum value tracked Range: 0 - 999999
ALG.MAXNEG#1 MAXNEG Specify ON if the maximum weight is a negative value OFF, ON
- 880 Performance Series 1
- Technical/Service 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 7
- General Safety 8
- 1.2 Operating Modes 9
- 1.3 Front Panel Display 9
- Center of Zero LED 10
- Standstill LED 10
- 1.4 Indicator Operations 11
- 1.4.7 Print Ticket 12
- 1.4.8 Front Panel Setup 12
- 1.4.10 Setpoints 13
- Turn Setpoint On or Off 13
- 1.4.11 Set Time and Date 14
- 1.4.12 Display Accumulator 14
- 1.4.13 Clear the Accumulator 14
- 1.4.14 Display Tare 15
- 2.0 Installation 16
- 2.2 Panel Mount Installation 17
- Important 18
- J1 J2 J3 J4 J5 J6 19
- 2.4 Display Board Replacement 22
- 2.5 Cable Connections 22
- 2.6 USB Host 24
- 2.7 Ethernet Communications 24
- 2.8 CPU Board 25
- 2.10 Board Replacement 26
- 2.11 Digital I/O 28
- 2.12 Legal for Trade Sealing 28
- 2.13 Option Cards 29
- 2.14 Battery Replacement 29
- 2.15 Replacement Parts 30
- 3.1.3 User Setup Menu 33
- 0 0 0 0 0 0 34
- 3.2.1 Audit Menu 35
- 3.2.2 Setup Menu 36
- 37
- SCALE Menu 38
- 3.2.4 FORMAT Menu 40
- FORMAT Menu 41
- 3.2.5 Calibration Menu 42
- FEATUR Menu 44
- COM Menu 50
- ETHERNET Menu 52
- 3.2.11 USB Host 53
- 3.2.12 Print Format Menu 54
- Configuration 51 57
- SETPTS Menu 58
- 4.0 Calibration 63
- 4.1 Front Panel Calibration 64
- 4.1.2 Rezero 65
- 4.5 Gravity Compensation 66
- 4.6 EDP Command Calibration 67
- 4.7 Revolution 67
- Calibration 67
- 5.0 Using Revolution 68
- 5.2 Configuration 69
- 5.4 Revolution Help 70
- 6.0 EDP Commands 71
- 6.1.2 Reporting Commands 72
- Scales Menu 73
- Format Menu 73
- Calibration Menu 74
- Ports COM Menu 74
- Ports – Field Bus Menu 75
- Ports – Ethernet Menu 75
- Ports – USBCOM Menu 76
- Stream Tokens Menu 76
- Feature Menu 76
- Regulatory Menu 77
- Time and Date 77
- Passwords Menu 77
- Keypad Lock Menu 77
- Setpoints Menu 78
- Print Format Menu 80
- Analog Out Menu 80
- 6.1.5 Normal Mode Commands 81
- Digital I/O Control Menu 82
- 6.1.6 ERROR Commands Output 82
- 7.0 Print Formatting 83
- 7.2 Default Print Formats 84
- 7.3 Customizing Print Formats 85
- 7.3.3 Using Revolution 86
- 8.0 Setpoints 87
- 8.2 Batch Operations 89
- 8.3 Batching Examples 91
- Example 2 92
- 9.0 Ethernet and USB 93
- Ethernet and USB 89 95
- Using Revolution 96
- with Ethernet 96
- 9.2 USB Host 97
- 9.2.2 USB Memory storage 98
- Saving Configuration 98
- Loading Configuration 98
- 10.0 Appendix 100
- 10.3 ERROR Commands Output 101
- 10.4 Status Messages 102
- 10.6 Data Formats 103
- <STX> 104
- ONTROL-B>AXG#1<CR> 105
- 10.8.1 Toledo 8142 Indicator 108
- 10.8.2 Cardinal 738 Indicator 109
- 10.9 ASCII Character Chart 111
- 10.10 Digital Filtering 113
- (Section 4.0) 114
- 10.12 Specifications 115
- 880 Limited Warranty 116
- For More Information 117
- PN 158387 Rev C 120
Verwandte Produkte und Handbücher für Waage Rice-lake 880 Performance Series Indicator/Controller Techni
(4 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern