Rice Lake Versa-portion RLP-S Spezifikationen

Versa-portion RLP-S/SMMulti-Purpose Bench ScaleOperation Manual115519

NoteNote4 Versa-portion RLP-S/SM Operation ManualTo exit calibration at any time, press the TARE key.3.Ensure there is no weight on the platter, then

Calibration 53.With the ZERO key held, press and release the TARE key, then press and release the POWER key twice.The SPEC number is displayed.4.To i

6 Versa-portion RLP-S/SM Operation Manual3.5 Internal Count and A/D Count Display1.With the unit in weigh mode, press and hold the ZERO key.2.With the

Appendix 74.0 Appendix4.1 DC Battery Pack4.1.1 Battery Pack Replacement/InstallationAn optional DC battery pack (PN 108516) for the Versa-portion RLP-

8 Versa-portion RLP-S/SM Operation Manual4.2Table 4-1. Error MessagesDisplay Description Solution8 8 8 8 8 8 The scale is not steady. Place the scale

Specifications 95.0 SpecificationsDisplay LED, 6 digitsCapacity RLP-6S 6.000 lb x 0.002 lb; 3000 g x 1 g; 60.00 oz x 0.02 oz RLP-15S 15.000 lb x 0.00

10 Versa-portion RLP-S/SM Operation ManualVersa-portion RLP-S/SM Limited WarrantyRice Lake Weighing Systems (RLWS) warrants that all RLWS equipment an

230 W. Coleman St. • Rice Lake, WI 54868 • USAU.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319w

ContentsAbout This Manual ...1Introduction ...

2

Introduction 11.0 IntroductionbThe Versa-portion RLP-S/SM is a multi-purpose bench scale that offers practical solutions for a full range of applicati

2 Versa-portion RLP-S/SM Operation Manual1.2 Front PanelTable 1-1 lists the indications and front-panel buttons available on the Versa-portion RLP-S/S

2 Versa-portion RLP-S/SM Operation Manual2.0 Operation2.1 On/Off1.Press the POWER key. The display will blink 8.8.8.8.8.8. and show 0.000 when ready t

Operation 32.5 Default Primary UnitThe Units button cycles through g, lb, and oz. (Versa-portion RPL-SM is only available in kg)Setting the Default Pr

Calibration 33.0 CalibrationTo enter calibration mode, remove the screw on the bottom of the scale as shown in Figure 3-1. Use a small tool to press t